Tiny fourth layer—the darkest shadows at the base of the pears and the stem on the pear in front.
|

Paint Shapes, Not “Things”

Want your paintings to look unified? It helps to combine “things” into larger shapes, and then use smaller shapes to (partially) separate them. Here’s an exercise to help you practice.

First, set up a still life with a couple of simple objects. Avoid anything that has a lot of pattern, texture, reflections or complicated edges—you want to be able to capture the overall silhouette fairly easily. A couple of pieces of fruit or simple vegetables work well. Or a couple of eggs or smooth stones.

If you like more geometric shapes, you could include things like a simple mug or bowl, or a little box. Try to stay away from anything that will tempt you to get caught up in details or worries over getting the right proportions, so you can stay focused on the main point of the exercise.

Use a desk lamp or a sunny window to set up your still life with a single strong light source, so you have some definite shadows.

Our setup: two simple objects, set up with a strong light to cast clear shadows.
Our setup: two simple objects, set up with a strong light to cast clear shadows.

Next, using a graphite pencil or watercolor pencil, whichever you prefer, lightly draw the outer silhouette only of the objects and their shadows. Most people find it quite difficult to draw just the outer silhouette, so alternately, you could draw everything, and then erase all the interior lines. In the example below, I’ve drawn the lines in ink so they’ll show up in the photo, but you’ll want to make faint pencil lines, just dark enough for you to see where to put your first wash.

Draw ONLY the outer silhouette of the objects PLUS their shadows. I've used ink, so the drawing will show up in the photo, but you should just make light pencil lines.
Draw ONLY the outer silhouette of the objects PLUS their shadows. I’ve used ink, so the drawing will show up in the photo, but you should just make light pencil lines.

Next, fill in the entire silhouette with ONE wash. By “one wash” I mean that you DO NOT stop at the “edge” of any of the objects! Just keep right on going. The entire area should be wet all at the same time.

However, you can change value and color as you go. If you have objects of two different colors, the colors will bleed into one another, but that will actually work to your advantage. By the same token, the color of the objects will bleed into the shadow areas, and that also is a good thing. (To see a more dramatic example of how this works in multiple colors, you might want to watch the Bowl and Lemons demo from my Watercolor Jumpstart class.)

I switched to darker, greyer color as I got to the shadow areas, but as you can see, it bled into the still wet area of the pears. It turns out that is a good thing, so don't try to prevent it.
I switched to darker, greyer color as I got to the shadow areas, but as you can see, it bled into the still wet area of the pears. It turns out that is a good thing. It will actually help us suggest reflected light, and the overall lighting in the scene, so don’t try to prevent it.

If you haven’t done the Bowl and Lemons exercise, you might find it helpful to paint along with me on that exercise before trying this one. In the Bowl and Lemons exercise, I have made the decisions about what shapes to paint for you. In this exercise, it will be up to you to find the smaller shapes to layer over your first wash to help the viewer distinguish individual “things”.

Next, I’ve chosen to paint the “shadow side” of both pears as one shape. To help me see the overall “shapes” that make up these “things” I use the standard artist trick of squinting until all the detail is lost and all I can see are the larger shapes that make up my setup.

I also lifted a little color on the pear in back to suggest the small highlight. And, because I was hurrying a bit, the shadow under the pear in front was still wet, so my new shape bled into that area. I didn’t worry about that, because I know that I will be layering another shape on top to make the shadows on the table, so that little bleed will get covered up.

As I add new shapes, I keep reminding myself to leave at least some of the previous layer untouched. Doing this helps me resist the temptation to endlessly “fix” stuff by going over the entire first wash and keeps the painting looking fresher.

The new shape layered over the first wash.
The new shape layered over the first wash.
Second layer—The shadow side of both pears.
Second layer—The shadow side of both pears.

Next, I painted another layer over the cast shadows on the table, (plus darkening the stem on the pear in back and adding the little blossom end on the pear in front).

Notice I only needed a small shape to make it possible for the viewer to see the separation between the two pears. Make it a goal to use as little as possible to “separate” two objects. Most of us want to do WAY more than necessary!

The shapes I added in the third layer.
The shapes I added in the third layer.
Third layer—The cast shadows, and a small shape to "separate" the two pears.
Third layer—The cast shadows, and a small shape to “separate” the two pears.

Finally, I darkened the shadow side of the pear in front, added the small, dark shadows directly below each pear, and the dark stem on the pear in front.

Fourth layer—the shadow side of the pear in front, small shadows below each pear, and the stem of the pear in front.
Fourth layer—the shadow side of the pear in front, small shadows below each pear, and the stem of the pear in front.

Done! At this point we can see the two pears as two separate “things” sitting on a surface, casting shadows, but we did it by painting shapes, not things!

Tiny fourth layer—the darkest shadows at the base of the pears and the stem on the pear in front.
Tiny fourth layer—the darkest shadows at the base of the pears and the stem on the pear in front.

It’s quite a challenge to learn to see this way, so don’t be discouraged if you have a hard time with this exercise at first. Instead of laboring over each layer, and going back to “fix” your work, give yourself a short time limit—say 5 minutes—to complete each attempt, and then change things around and try again.

Remember, the goal here is to practice the technique, not “make a painting”. You don’t have to show these to anyone, so push yourself to see just how little you can do to suggest things by layering smaller and smaller shapes. Try hard not to ever entirely cover up a previous shape!

Don’t make this a chore! Use it as a warm-up, or when you only have a few minutes to paint. Set a timer, and when the timer goes off, give yourself permission to be done with it.

The more you do this, the more you’ll tune in to this way of looking at the world while planning your paintings. And you’ll also be gaining confidence in the power of a few small shapes to dramatically change how your paintings look, which will help you relax and paint more freely and boldly. And who doesn’t want that? 🙂

Similar Posts